Cyclic Stick AW-139

Item number: HC-AW139-CYC

Category: AW-139 Control Parts

Wire-ends
free cable length
bended tube

starting from 294,60 €

including 19% VAT. , plus shipping (DHL Homecopter)

can be ordered

Shipping time: 61 - 62 workdays



Cyclic-base
  • Basic mechanics Cyclic Controls for Home Cockpits

    • oil damped motion
    • Restoring force adjustable by spring
    • Rest position eccentrically adjustable
    • Recording for Ø30mm tube with 2 mm wall thickness
    • Way about +/- 15 ° for pitch and roll axis
    • 2x Hall sensor and rotating Neodymium magnet
    • high resolution by translating the rotary motion
    • Cord for Bodnar Controller
    • Installation under the floor panel

    up ready for connection

Button Box

min. 1x per Cockpit

  • USB push-button interface card with terminal contacts and USB B socket

    32 input points

    Measurements

    • Length: 85.6mm
    • Width: 53.98mm
    • Height: 16.2 mm
    • Recommended wire size
    • 24AWG to 20AWG


    Mounting hole for M2.5

    No additional driver is required. The board is instantly recognized as a joystick.

    Software Downloads at Leo Bodnar:



    http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=205

Joystick Controller

min. 1x per Cockpit

  • USB joystick interface card from Leo Bodnar

    8 axes and
    32 inputs + 8 way coolie
    or
    36 inputs

    • Measurements
    • Length: 55mm
    • Width: 32mm
    • Height: 14.6 mm

    Recommended wire size
    24AWG to 20AWG

    Mounting hole for M2.5

    Connection to the PC
    The circuit board has a standard USB-B connector for connection to PC or Mac. No additional driver is required. The board is immediately recognized as a joystick.

    Here you get the software for setting and adjusting the axes:
    Http://www.leobodnar.com/products/BU0836/DIView.zip

  • Break out circuit board, which provides a simple matrix circuit for the BU0836A
    32 simultaneously active key inputs. The last 4 contacts form 8-direction point-of-view hat (coolie) switch.

    • Diodes are already wired for you on the back of the board.
    • Easy connection of keys and encoders.
    • Enables the use of more than 12 buttons easily and without external diodes.
    • Section for the analog axes
    • 2x6 socket for plugging onto the BU0836A joystick controller
    • 2x 2x 18 pin pin strip for the buttons / switches

    As an alternative to direct mounting on the BU0836A board, a 12 pin cable with 2x6 pinheaders can be used.


    Attention does not work with just one common line. 6 switching functions each can be connected to a one common line!

    Here you get the software for setting and adjusting the axes:
    Http://www.leobodnar.com/products/BU0836/DIView.zip

Your configuration

Cyclic pilots stick similar to the AW-139 for home cockpits

    • 2-piece handle
    • Polyamide sintered laser printing
    • painted black matt
    • Screwed cover plate

  • 6 buttons
  • 1 coolie (4-way button)
  • PTT button with 2 switching points (internal and external COM)
  • Industrial cables for energy chains with ferrules for screwing to the BBI with terminals
  • Aluminum tube Ø30mm, 2mm wall thickness in AW-139 style
  • Suitable for the Cyclic base

    On request also with ferrules for screwing on BBI-32 with clamps
    Or 2x17-pin socket strip for the BBI-64

     


    Product weight: 0,80 Kg

    Average product review

    Write your first review and help others with their purchase decision:

    Contact